What Problems Should Be Paid Attention to When Using Dumpling Machine?

For some users who have just bought a dumpling machine and are about to buy it, how does the fully automatic dumpling machine operate when it is used for the first time? What should be paid attention to during operation? What about the solutions to problems that arise at work? Let Dumpling Machine Supplier explain it in detail for you.

Dumpling Machine

(1)Try filling

Using the machine to debug the dumpling filling is to put the adjusted filling into the filling hopper before testing the noodles, and then turn on the filling switch of the machine, wait for the filling to come out of the outlet, turn on the machine to observe whether the output of the dumpling filling is uniform and stable, Whether there is any interruption, wait until the filling is normal and the machine runs for 1 to 2 minutes, turn off the filling supply switch.

(2)Try face

Debugging the dough is to check the amount of dough or whether it is uniform and the thickness of the dumpling dough is suitable. We first make the reconciled noodles into dough and put it into the noodle inlet. After the machine is turned on, the dough is pressed out from the two pairs of rollers, and then it becomes a noodle tube underneath and squeezed out from the inside to the outside mouth. The thickness of the noodle tube is generally controlled at about 1.0mm. The thickness of the noodle tube is adjusted by rotating the noodle adjustment nut, and the speed of the noodle tube is adjusted by the control switch.

(3)Inclusion

Fill the dry noodle bucket and bottom box of the machine head forming rack of the dumpling machine with dry flour, turn on the noodle supply switch, wait for the dough to come down and pack a few empty dumplings, then turn on the filling switch to adjust to the appropriate speed, and start it continuously Dumplings are made.

What are the problems that need to be solved in the daily use of Dumpling Machine?

In the process of making dumplings, if you find that the amount of filling is insufficient, the filling is intermittently supplied and the filling buckle does not produce the filling, you should immediately cut off the power and turn off the machine, take out the filling auger, and check whether there is any blockage in the filling module. phenomenon.

If continuous cracks in the dumplings are found during the dumpling process, it means that there are debris in the noodles, or there are residual wastes in the last cleaning, such as noodles, dried noodles, etc., the dumpling machine should be shut down in time, stop feeding, and Just take out the foreign body. If dumplings are found to stick or stick to the mold, check whether the dry flour is sufficient.

Cleaning the dumpling machine

After each use, the machine must be opened and cleaned. The disassembly procedure is relatively simple, as long as the noodle and stuffing parts are cleaned.

Our company also has Bakery Biscuit Machine on sale, welcome to contact us.